In this DIY video I build a wooden lathe. I used very hard plywood to make this lathe. Building a bit long, but it was worth it. Because I built a very robust lathe...
I decided to do it myself. For this, I used a 10mm leaf drill bit that I had at hand. The result was even better than I expected.
I made a template for routers. Mostly used for linear channel. It can even be used to drill large holes. It has a simple and adjustable structure. You can make perfect da
If you are tired of knob making methods, this new method is for you. We make wooden knobs using a table saw, not a column drill. Watch the video for cute and useful knobs
During compression, the ruler slipped and I could hardly get the size I wanted. To solve this problem, I designed a new ruler marking gauge.
I only used wood to make the air blower. I mounted the pieces I made out of wood on an angle grinder. It turned out to be a wonderful air blower. It can blow very strong
Easy to carry, lightweight and durable. I also fixed the table legs to the table with a newer method. It is very easy to disassemble. I will love using this wonderful cam
You are viewing the topic: Wooden-Plywood Lathe Making 2 under Wood Turning category
If you have built something using this site, you can send photos of what you have build to firstname.lastname@example.org. Your photos will be published on this site.
In this video; I will be building a tool for circular saw blade sharpening. A beatifull jig for blade sharpening. You can fast easily sharpening your blades. I used in t
Topic of the Week Sharpening
In this video, I make an adjustable drill bit. I start by using the metal I cut from the M12 bolt. Then I am cutting a Spade Drill Bit. Then I combine the two.