Very useful and cute tablet stands. You can easily make it using 8mm plywood.
I am making a new Corner Clamp. First I designed it in Sketchup program and then I started to make it. It was an ideal tool for making 90 degree clamping. I used 20mm har
If you want to do a smooth sanding, you need a tool like this. This sanding tool, which looks like a hand plane, will come in handy.
I am making a table saw miter sled using plywood. It's a great tool for making full 45 degree cuts on a table saw.
From hard wood we make a marking ruler. Same as 3D printed!
I am making wooden C clamps which will be very useful in this video. These small C-clamps are great tools for our DIY workshop. I called them DIY G Clamps because they ar
In this video, I am making a toggle clamp that I designed myself. This toggle clamp, which I made using wood, was extremely sturdy. If you want to make this simple toggle
Do you want to cut exactly 90 degrees or 45 degrees with your table saw? Moreover, you can easily do this with a miter gauge.
The table of this stand I made is movable. It can be adjusted to any angle you want. Suitable for all kinds of notebooks. I tried it for 17.3" and 13" notebooks and found
After watching this video, you can download the free PDF document and make it easily. There are many 90 degree corner clamp videos on youtube. But this is a little differ